Cars We Sold

1959 Ferrari 196 SP Replica Serial Number 1432

Sold

Lead photograph of 1959 Ferrari 196 SP Replica Serial Number 1432

Specifications

Make   Ferrari Model   196 SP Replica
Year   1959 Serial #   1432
Engine #    VIN   
Engine Type   Dino 206 Chassis Type   Tube
Build Sequence #    Number Built   
Body Type   Spyder Body Builder   
First Owner    Current Owner   Current Owner
Build Sheet   No Current Location   California

Features

1959 Ferrari 196 SP Replica s/n 1432, a left–hand drive alloy–bodied replica of a 1959 Ferrari 196 SP. Finished in excellent Ferrari red paint with comfortable and form-fitting full–leather seats and excellent panel fit. Full-width wrap-around plexi windscreen and other event–friendly details such as four wheel disc brakes, Dunlop racing tires and modern seat belts. Registered in California and comes with its 1988 California pink slip. 196 SP Replica s/n 1432 has gone through an extensive mechanical restoration and is powered by a freshly rebuilt and well-tuned 4–cam alloy-block 206 engine and five-speed gearbox. Fitted with three velocity–stack-topped Webers and side pipes with a full syncro five–speed gearbox. Nicely accented with a clear plexi-glass hood scoop. Four wheel disc brakes slow it down, Dunlop racing tires keep it on track and light weight make for a very quick and user-friendly event car. Outfitted with an ATL fuel cell with an outside fuel filler. Correct period–style dash and gauges. Excellent attention to details with covered headlights, hood straps and hold downs, side vents and the fuel cell. With the original 196 SPS valued at well over $7,000,000, this replica is nice recreation of the original concept and fully functional for touring events or road use.

History

2006, 04 Nov., Carobu Engineering LLC., repair car to race safety inspection condition as per customer request, check out car for repair and estimate, do compression and leak-down test, remove drive train, suspension, dash, steering system, gas tank and all 4 hubs, remove all brake lines and master cylinder, fabricate new bracket for steering rack, remove old front shock brackets from a-arms and clean, cut out transmission tunnel, pedal brackets and part of the firewall, fabricate pedal assembly pivot bracket and locate, engineer, modify and machine sample hub to new specification. labor and sublet- $4,955.28, parts: $646.97, sales tax: $50.14, parts: u-joint, v-belt, misc., steel for fabrication, weber carb rebuild kit, spline hub, parts total: $646.97, labor and sublet, shop labor, 51 hours at $95.00/hr- $4,845.00, radiator shop, rod out and repair $80.00, shipping- $30.28, labor and sublet total: $4,955.28. Invoice Total: $5,652.39.

2006, 01 Dec., Carobu Engineering LLC., repair car to race safety inspection condition as per customer request. Labor Summary, Paint radiator black. Disassemble calipers and brake discs. Prepare hubs for modification. Machine front and rear hubs. Fabricate shock mounts for front A-arms. Remove clutch and inspect. Mask, sand, prime and paint f & r shocks Koni orange. Fabricate steering shaft. Weld in steering shaft mounts and assemble shaft. Assemble and mount hubs. Install front suspension with shocks. Fabricate parts for brake pedal assembly. New clutch needed. Invoice labor and sublet: $5,146.58, parts: $1,685.11, sales tax: $130.60, parts: spline hub, front caliper kit, rear caliper kit, brake rotor, wheel bearing seal, retaining screw, misc. steel round, koni front shock, shock cushion, misc. paint supplies for shock reconditioning, radiator, lock nut, grade 8 bolt. parts total: $1,685.11. Labor and sublet, shop labor, 48.3 hours at $95.00/hr- $4,588.50, machine shop, modify hubs for welding- $185.00, welding shop, hubs- $100.00, Platers, cadmium on small parts- $72.00, powder coating, springs and misc. parts $115.00, shipping (parts) $86.08. labor and sublet total $5,146.58. Invoice Total: $6,962.29.

2007, 02 Feb., Carobu Engineering LLC., repair car to race safety inspection condition as per customer request, labor summary: continue on pedal assembly and suspension, labor and sublet- $349.95, parts: $632.40, sales tax: $49.01, parts: brake caliper coating system- $51.40, clutch pressure plate- $280.00, clutch disc- $211.00, t.o. bearing- $90.00, parts total: $632.40, labor and sublet, Shop labor, 2 hours at $95.00/hr- $190.00, welding shop, wheel hubs and A-arm brackets for shocks- $130.00, shipping (parts) - $29.95, labor and sublet total: $349.95. Invoice Total: $1,031.36.

2007, 24 Apr., Carobu Engineering LLC., repair car to race condition and rebuild engine as per customer request, labor summary: weld steering brackets and motor mounts, disassemble and inspect engine, clean and prep engine parts, disassemble carbs, overhaul and paint brake calipers, install steering rack and rear shocks, media blast block for welding repair, prepare camshafts for grinder, remove drive spuds, rebuild distributor, replace advance cam. Repair drain plug by boring out and installing new bushing. Install new oil pump, fabricated drive bushing. Assemble oil filter housing and fabricate alternator bracket. Labor and sublet, $6,753.96, parts $9,805.01, sales tax $759.89, parts: caliper joint seal, ball bearing, fuel cell, full gasket set, thrust washer set, rod bearing set, main bearing set, cam chain, cam drive bearing, cylinder liner, con rod bolt, con rod nut, rod bushing, crank gear, water pump seal, water pump bearing, water pump impeller, oil pump 246, exhaust valve, valve guide, valve spring set, piston set, crankshaft pilot bearing, sump plug, distributor rebuild kit, point set, marelli, condenser, intake valve, dino con rod, distributor advance plate, parts total: $9,805.01, shop labor, 46 hours at $95.00/hr- $4,370.00, machine shop valve seat refinish, surface, pressure test , replace guides: $525.00, machine shop, re-profile 4 cams $720.00, machine shop, machine rotors-$150.00, clean block- ultrasonic- $100.00, welder, water pump repair, block repair- 225.00, shipping, duty and taxes- $663.96, labor and sublet total: $6,753.96. Invoice Total: $17,318.86.

2007, 12 June, Carobu Engineering LLC., repair car to race condition and rebuild engine as per customer request, labor and sublet total: $11,013.25. Labor summary, clean and prepare transmission and bell housing for test fitting. Fabricate parts and test fit pedal cluster. Assemble cylinder heads. Set up heads on engine block for test fitting in car. Adjust clutch linkage to fit new pedal cluster. Fill transmission and differential with oil. Make spacers for trans mount. Make dowels for timing gear cover. Assemble engine, then disassemble to repair bad head stud threads. Fabricate frame for fuel cell, weld in missing tube on rear sub frame and fuel cell frame. Fabricate mounting straps for cell. Begin trans tunnel fabrication. Remove shift tower from trans. Install front caliper lines and master cylinder, labor and sublet $11,013.25, parts: $2,280.44, parts: gearbox mount, master cylinder rebuild kit, front brake hose, rubber sheet 1/8”, front brake pad set, rear brake pad set, LeMans gas cap, brake line, steel, stud insert, steel strap, head gasket, dcnf carburetor, gear oil. Parts total: $2,280.44, labor and sublet, shop labor, 85.5 hours at $95.00/hr, machine shop, modify main bearing caps to fit block with dowel locators, machine shop, resize and bush rods, mag and grind crank, deck sleeves machine shop, deck block, align hone main saddles, plating shop, cad plate fuel tank straps, shipping, duty and taxes, Invoice Total: $13,470.42.

2007, 26 June, Carobu Engineering LLC., repair car and rebuild engine as per customer request, labor summary, engine: clean and prepare block for assembly, re-assemble lower end, install cylinder heads and time camshafts. Check block for leaks; found 2 cylinders leaking. Teardown engine remove all sleeves for inspection. Fabricate block drain plugs. Heat block in oven, re-install cylinder liners with anaerobic sealer. Reassemble engine and pressure check (ok). Install manifolds, carbs, etc. Chassis: install gas filler neck and hose with special t-clamps. Install tail lights, make wiring harness and install. Install and fit wiring for head and brake lights. Test wires at fuse box for starter button. Install dash and steering column. Clean alternator and starter. Check fit radiator and fan. Make wiring for fuel pump. Fabricate steel brake lines and make mounting tabs. Install new front brake hoses and lines. Install brake pads. Bleed brakes. Install gas tank straps with rubber cushions. Fabricate and install new fuel pump mount and new hose. Clean electric fuel pump, test and install. Labor and sublet $7,979.21, parts: $516.85, sales tax $40.06, parts: gasket material, head gasket, exhaust hanger strap, aluminum sheet, steel/wire, hose, clamp, fitting, seal, raydot flat mirror, raydot convex mirror, shifter boot, shifter hold down ring, weber carb kit. Parts Total: $516.85, labor and sublet, shop labor, 76.8 hours at $95.00/hr, $7,296.00, machine shop, mill work on block- $365.00, ceramic coating, exhaust headers- $275.00, shipping, duty and taxes (parts) $43.21. Labor and sublet total: $7,979.21. Invoice Total: $8,536.12.

2009, 15 May, Enzo Motors, 196 SP replica restoration, fabrication, parts: battery $132.62, battery switch $48.21, hold downs $8.12, metal $80.00, tubing $62.00, an fitting $165.00, an hose $65.00, rod ends $185.00. Invoice Total: $4,065.00.

2009, 21 May, Enzo Motors, 196 SP replica restoration, hose fitter, fast filer, brake master, fabrication, line tracks on steering wheel fuel hoses. Invoice Total: $2,902.00.

2009, 04 June, Enzo Motors, 196 SP replica restoration, brake line, fittings, brake Parts, fabrication brakes etc., repair wheels: Invoice Total: $2,066.00.

2009, 30 Sept, Enzo Motors, 196 SP replica restoration, Parts: $500.00, fabricate. Invoice Total: $3,000.00.

2010, 12 Oct., Enzo Motors, 196 SP replica restoration, fabricate dash for gauges, Invoice Total: $2,187.33.

2011, 18 Jan., Enzo Motors, 196 SP replica restoration,, remove steering wheel, fabricate parts welding alignment remold brake, reset ft. bearings, parts: rod ends node rings $165.12, misc. nuts coupes $27.29. Invoice Total: $2,902.91.

2011, 15 Feb., Enzo Motors, 196 SP replica restoration, fabricate rear shocks. center diff., fabricate battery box, fabricate fuel hoses, fabricate fuel pump, parts: metal 35.00, bolts $5.19, axel stops $65.00, hose and fitting $280.00. Invoice Total: $6,551.31.

2011, 21 Mar., Enzo Motors, 196 SP replica restoration, finish welding rear end and frame, parts: paint $150.00, nuts bolts $63.33, shift parts $50.00. Invoice Total: $2,663.33.

2011, 10 May, Enzo Motors, 196 SP replica restoration, fabricate mufflers, Invoice Total: $2,710.00.

2011, 16 June, Enzo Motors, 196 SP replica restoration, fabricate brake parts, brake lines, remove engine and gear box for parts, send part eng bay, parts: maker $163.50, paint $75.00, box joint bods $57.80. Invoice Total: $3,941.30.

2011, 20 Aug., Enzo Motors, 196 SP replica restoration, fit windows install wiring, track work, tear down engine rebuild, parts: belts, washers: $50.00, switches $145.21, 1 ft pulley $400.00, gaskets $565.20, 2 main boys $200.88, oil tank $33.53. Invoice Total: $6,348.02.

2011, 20 Oct., Enzo Motors, 196 SP replica restoration, install engine, gear box headers, fab clutch rod , more wiring, hose clamps, $14.12, Shrink Tube $10.42, hose string $10.91. clamps. Invoice Total: $3,086.33.

2012, February, Enzo Motors, 196 SP replica restoration,, battery- $153.67, fab battery box, fab seat belt angels, and fuel pump, Invoice Total: $3,003.01.

2012, 10 Feb., Enzo Motors, 196 SP replica restoration, fuel hoses reg. clamps, wiring fusion deb/ ign switch tanges, parts: nuts bolts: $50.00, 2 belt hoods $30.12, aoldt plus $125.00, clamps ins $8.25, share tube $20.84, pick switch $18.71, rubber books $35.00, fuel links $150.00, rad cap $52.00, fuel reg $35.00, water $6.00. Invoice Total: $3,495.92.

2012, 27 Mar., Enzo Motors, 196 SP replica restoration, shocks- $380.00, springs- $100.00, fuse board- $120.65, Invoice Total: $617.40.

2012, 11 May, Enzo Motors, 196 SP replica restoration,, r & r Springs rear, seat ride height. Invoice Total: $750.00.

2012, 12 May, Enzo Motors, 196 SP replica restoration,, repair order: $250.00, Invoice Total: $575.00.

2012, 06 June, Enzo Motors, 196 SP replica restoration, Fabricate and weld steering shaft. Parts: u joints, weld bongs, home joints, metal $550.00, 2 shafts 36. Invoice Total: $2,331.00.

2013, October, on consignment with Mike Sheehan’s www.Ferraris-online.com.

Note: The above vehicle information is complete and accurate to the best of our knowledge at the time it is posted to this website. Corrections or additional information is always appreciated.